Hammers and Mallets
A brilliant selection of Hammers and Mallets to help you get your jobs done for sale from the webs best merchants.
GENERAL TOOL KIT
Comprises combined roller cabinet chest (size 616 x 330 x 1080mm) with Hammer Drill and a selection of popular hand tools.
Core Drill 125mm K Taper Kit
Heavy-Duty core bit machined from solid steel billets and both interior and exterior surfaces are machined to the highest standards to eliminate any possibility of fatigue failures. The Tungsten carbide tips are fast cutting and feature Chipbreaker toothing which coupled with the core exterior fluting remove debris from the cut rapidly to ensure snag free cutting. Heavy-duty cores of this type may be used with a hammer action.Diameter 125 mmType K Taper kitTungsten Carbide TippedSupplied with: 1 x 120 mm adaptor1 x Pilot drill 1 x Extractor drift key.
Core Drill 115mm K Taper Kit
Heavy-Duty core bit machined from solid steel billets and both interior and exterior surfaces are machined to the highest standards to eliminate any possibility of fatigue failures. The Tungsten carbide tips are fast cutting and feature Chipbreaker toothing which coupled with the core exterior fluting remove debris from the cut rapidly to ensure snag free cutting. Heavy-duty cores of this type may be used with a hammer action.Diameter 115 mmType K Taper kitTungsten Carbide TippedSupplied with: 1 x 120 mm adaptor1 x Pilot drill 1 x Extractor drift key.
322 Copper Hammer Size 5 (70mm) 6350g
Thor copper hammers have a malleable Iron head fitted with two cylindrical faces of pure electrolytic copper on a wooden shaft. Available in 6 different weights.The malleable Iron head provides the weight for the blow and the the Copper faces also provide weight whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a relatively small striking area. These copper hammers have faces that are designed to wear and can be easily replaced as spare faces are available.They are used as a general-purpose soft-faced hammer in automotive and general engineering for assembly, repair and maintenance.(No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.) Size: 5.Weight 6000g (14lb).Diameter 70mm (2 3/4 in).
D25301D SDS Plus Dust Extraction Telescope
The DeWalt D25301D SDS-Plus Dust Extraction Telescope is for use with DEWALT corded and cordless SDS-Plus hammers. It is ideal for dust free drilling up to 16 mm in diameter, the quick-fit system for easy tool free assembly and release and it is tough and versatile to meet the needs of the most demanding applications with a compact design to maintain visibility and extremely light weight to minimise user fatigue.It has a 150 cm heavy-duty rubber hose for maximum reach and a side handle adaptor for increased compatibility.Applications- Drilling indoors when required by legislation- Preventing dust contamination in environments such as houses, offices and hospitals- Drilling close to dust sensitive equipment- Minimising job site clean-up- To protect the operators eyes when drilling overhead SpecificationsFits: Corded and Cordless SDS-Plus Collar Diameter : 43 / 54 mm Max. Drill Bit Diameter: 16 mm Max. Drill Bit Length: 224 mm Max. Drilling Depth: 150 mm Hose Length: 1500 mm Hose Diameter: 35mm Weight: 1.2kg Standard Equipment : Side handle with dust extraction adaptation, Telescope and extraction head, Rubber hose, 43mm adaptor, Carton box
222 Copper / Rawhide Hammer Size 5 (70mm) 5000g
These Thor hammers are a general-purpose, soft-faced hammer for automotive and general engineering applications in assembly, repair and maintenance operations. Available in 6 different weights.The malleable iron head is fitted with one rawhide and one copper face on a polished wooden handle.(No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)Ideal for use where a heavy blow is required in a relatively small striking area. One face is made from pure copper, the other from highly compressed buffalo rawhide and are both designed to wear and be replaced - spare faces are available.Size: 5.Weight 5000g (11 1/2lb).Diameter 63mm (2 3/4 in)
Core Drill 76mm K Taper Kit
Heavy-Duty core bit machined from solid steel billets and both interior and exterior surfaces are machined to the highest standards to eliminate any possibility of fatigue failures. The Tungsten carbide tips are fast cutting and feature Chipbreaker toothing which coupled with the core exterior fluting remove debris from the cut rapidly to ensure snag free cutting. Heavy-duty cores of this type may be used with a hammer action.Diameter 76 mmType K Taper kitTungsten Carbide TippedSupplied with: 1 x 120 mm adaptor1 x Pilot drill 1 x Extractor drift key.
MS500 Soft Touch Bevel Edge Chisel Set 6
Metal striking cap allows use with a hammer, prolongs the life of the handle and prevents mushrooming.The soft-touch handles are oil and water resistant to prevent slippage and to give improved comfort even during prolonged use. The handle design also reduces vibrations and reduces hand fatigue.One piece blade forging gives added strength and durability.Special tool steel ensures a much sharper cutting edge for quicker and easier operation.A special hardening process gives the blade a longer lasting edge - less time spent re-sharpening.The blade is hardened to the last inch giving more working chisel for your money.Every chisel is honed and sharpened ready for use out of the packet - to save you time and effort.Type: bevel edge.Set of six comprising:- 1 each 1/4, 3/8, 1/2, 3/4, 1 and 1 1/4 in. Supplied in a wooden box
Hammer Non Metallic Wheat Nubuck Boot Size 9 - 43
The DeWalt Hammer safety boots are lightweight and Non metalic with a Brown Nu-buck upper and anti bacterial in-sole with dual density seat region for shock absorptionOther safety features include:200 Joule composite toe capComposite mid sole for under foot protectionEVA rubber sole resistant to 300-¦CChemical resistant soleOil resistant soleAnti staticEN Test: CE EN ISO 20345Safety rating: S1PSlip rating: SRA
Hammer Non Metallic Brown Nubuck Boot Size 6 - 39
The DeWalt Hammer safety boots are lightweight and Non metalic with a Brown Nu-buck upper and anti bacterial in-sole with dual density seat region for shock absorptionOther safety features include:200 Joule composite toe capComposite mid sole for under foot protectionEVA rubber sole resistant to 300-¦CChemical resistant soleOil resistant soleAnti staticEN Test: CE EN ISO 20345Safety rating: S1PSlip rating: SRA
Hammer Non Metallic Brown Nubuck Boot Size 9 - 43
The DeWalt Hammer safety boots are lightweight and Non metalic with a Brown Nu-buck upper and anti bacterial in-sole with dual density seat region for shock absorptionOther safety features include:200 Joule composite toe capComposite mid sole for under foot protectionEVA rubber sole resistant to 300-¦CChemical resistant soleOil resistant soleAnti staticEN Test: CE EN ISO 20345Safety rating: S1PSlip rating: SRA
Core Drill 55mm K Taper Kit
Heavy-Duty core bit machined from solid steel billets and both interior and exterior surfaces are machined to the highest standards to eliminate any possibility of fatigue failures. The Tungsten carbide tips are fast cutting and feature Chipbreaker toothing which coupled with the core exterior fluting remove debris from the cut rapidly to ensure snag free cutting. Heavy-duty cores of this type may be used with a hammer action.Diameter 55 mmType K Taper kitTungsten Carbide TippedSupplied with:1 x 120 mm adaptor1 x Pilot drill 1 x Extractor drift key.
7417070 Professional Engraver 240v
A Record Power professional engraver with universal quick release chuck.Ideal for marking steel and aluminium, jewellery security marking, wood carving, decorating glass, plastic, ceramics, stone and plaster.Continuously rated, hammer action, variable speed, wide range of points available.Supplied in a kit with the following points included:A2 Extra fine solid carbide point for glass and steel.A4 Heavy-duty carbide tip engraving point for hardened steel.A5 Point for engraving soft metals and alloys.A8 Abrasive point for frosting glass and smoothing.
RH275 Split Head Hammer Hide Size 5 (70mm) 3750g
The Thor Hide hammer has split cast iron head with two rawhide faces fastened securely to the handle with two socket head cap screws.The head design allows quick adjustment or replacement of either the handle or the faces, while the faces are designed to wear and can be rotated for even wear. There are 5 different weights to choose from in this range. For use as a heavy-duty, multi purpose soft-faced hammer in most industries for assembly, repair and maintenance operations.Size: 5.Diameter: 70mm (2 3/4 in).Weight: 3625g (7 1/2 lb).
Core Drill 50mm K Taper Kit
Heavy-Duty core bit machined from solid steel billets and both interior and exterior surfaces are machined to the highest standards to eliminate any possibility of fatigue failures. The Tungsten carbide tips are fast cutting and feature Chipbreaker toothing which coupled with the core exterior fluting remove debris from the cut rapidly to ensure snag free cutting. Heavy-duty cores of this type may be used with a hammer action.Diameter 50 mmType K Taper kitTungsten Carbide TippedSupplied with: 1 x 120 mm adaptor1 x Pilot drill 1 x Extractor drift key.
22 Rawhide Hammer Size 5 (70mm) 3275g
Thor rawhide hammers have malleable Iron head fitted with two cylindrical faces of compressed buffalo Rawhide on a wooden shaft.The malleable Iron head provides the weight for the blow and the Rawhide faces absorb the shock whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a relatively small striking area. These Rawhide hammers have faces that are designed to wear and can be easily replaced as spare faces are available.They are used as a general-purpose soft-faced hammer in engineering for assembly, repair and maintenance.(No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)Size 5Weight 3150g (7 lb)Diameter 63mm (2 1/2in)
Core Drill 30mm K Taper Kit
Heavy-Duty core bit machined from solid steel billets and both interior and exterior surfaces are machined to the highest standards to eliminate any possibility of fatigue failures. The Tungsten carbide tips are fast cutting and feature Chipbreaker toothing which coupled with the core exterior fluting remove debris from the cut rapidly to ensure snag free cutting. Heavy-duty cores of this type may be used with a hammer action.Diameter 30 mmType K Taper kitTungsten Carbide TippedSupplied with: 1 x 120 mm adaptor1 x Pilot drill 1 x Extractor drift key.